Make a blog

dublireview05l

2 years ago

Cisco CCNA Certification Exam Tutorial: RIP Details You Must Know

RIP is not exactly the most advanced routing protocol on the CCNA exam, but which makes it easy to ignore a number of the important details you must bear in mind so as to pass the exam! To help you review for the examination, here are just a couple of the facts!

RIPs default behavior is always to deliver 1 updates to version, but to just accept equally version 2 and 1 routing updates. Get more about dubli by browsing our stately link.

R2( config )#router split

R2( config-router )#net 172.16.0.0

R2( config-router )#^Z

R2#show ip address methods

Routing Protocol is ip

Sending updates every 30 seconds, next due in 6 seconds

Invalid after 180 seconds, maintain down 180, flushed after 240

Outgoing update filter list for several interfaces is

Incoming update filter list for many interfaces is

Redistributing: rip

Default version control: deliver version 1, receive any version

Interface Send Recv Key-chain

Serial0 1 1 2

Automatically, RIP v2 autosummarizes routing updates sent across classful community boundaries. To eliminate this behavior, work no auto-summary beneath the RIP process. Be taught further on this related paper - Click here: click here for. For further information, please take a peep at: account.

R1#conf t

R1( config )#router grab

R1( config-router )#version 2

R1( config-router )#no auto-summary

That you don't specify a mask or wildcard mask when making RIP only the network, even though youre working RIP v2.

R1#conf t

Enter configuration commands, one per line. End with CNTL/Z.

R1( config )#router tear

R1( config-router )#version 2

R1( config-router )#no auto-summary

R1( config-router )#network 172.10.0.0??

Debug ip address rip displays the routing updates and measurements because the ads are sent and requested. To see this doing his thing without waiting for the following regularly scheduled upgrade, work clear ip route *.

R1#debug internet protocol address grab

RIP protocol debugging is on

R1#clear internet protocol address course *

01:16:54: RIP: sending v1 update to 255.255.255.255 via Loopback1 (1.1.1.1)

01:16:54: system 2.0.0.0, metric 2

01:16:54: system 3.0.0.0, metric 2

01:16:54: system 172.16.0.0, metric 1

01:16:54: network 10.0.0.0, metric 2

01:16:54: RIP: sending v1 update to 255.255.255.255 via Serial0 (172.16.123.1)

01:16:54: subnet 172.16.123.0, full 1

01:16:54: community 1.0.0.0, metric 1

01:16:54: system 2.0.0.0, full 2

01:16:54: system 3.0.0.0, full 2

01:16:54: system 10.0.0.0, full 2

To see only the routes found by a routing protocol, ip route is shown by run followed by the title of the protocol:

R1#show ip address way tear

R 2.0.0.0/8 [120/1] via 172.16.123.2, 00:00:26, Serial0

Kiminas 3.0.0.0/8 [120/1] via 172.16.13.2, 00:00:09, Serial1

[120/1] via 172.16.123.3, 00:00:09, Serial0

Page1=46 10.0.0.0/8 [120/1] via 172.16.13.2, 00:00:09, Serial1

[120/1] via 172.16.123.3, 00:00:09, Serial0

[120/1] via 172.16.123.2, 00:00:26, Serial0

And do not forget - to turn off all currently running debugs, work undebug all.

R1#undebug all

All possible debugging has been deterred

In regards to the CCNA exam don't ignore RIP and IGRP. To check up additional info, please consider having a gander at: site preview. OSPF and EIGRP tend to be more complex to manage, nevertheless you need certainly to understand in order to pass the CCNA how distance vector protocols work!.